Disk chippers of two-stage grinding RB-700-LG-18,5 / RB-700-LG-22 and RB-1500-LG-30 / RB-1500-LG-45

Used to produce: * Chips for pellets / briquettes * Arbolite chips * Chips for smoking, fuel chips * Chips for bedding / cattle Initial raw materials: - gorbyl - cut, small lumpy waste - branches, bars, chips - cut veneer and plywood Application: Designed for the processing of waste woodworking, sawmilling and plywood production, regrinding of large chips in the small fraction. It is suitable for crushing not a large amount of wood waste in order to obtain a homogeneous composition of wood chips (crushed stone). Feature: * Double grinding with chopping knives and regrinding hammers * Availability of a sieve, increasing the uniformity of the chips produced * The presence of decks in the top cover, which prevent rubbing the crusher body * The presence of a protection system in the form of spring dampers in the receiving window, preventing the repulsion of the supplied raw materials * Ability to use pneumatic transport for removal of chips * Adjustment of the knife overhang and the availability of the calibration sieve allows to obtain a fine fraction of the chips * Inclined receiving neck provides material self-contraction Productivity to, bulk m3 / hour 2 / 2.5 and 3 / 3.5 Number of knives, pcs 4 Number of hammers, pieces 12 and 20 Availability of calibration sieve yes Installed power, kW 18,5 / 22 and 30/45 The size of the loading window, mm 153x137 and 191x146 The size of the resulting chips, mm * 1-30 Weight, kg 505/515 and 1000/1030 Overall dimensions, mm 1570x1020x1090 and 2024x1194x1645 * - The size of the chips produced depends on the setting of the knife overhang, the cell of the calibration sieve and the parameters of the raw materials (humidity, size, wood species)